Find an experienced builder in VIC

Assembly of an easy shed - garden shed 1.5m x 1.5m

We have a sliding aluminium driveway gate that is scraping and removing the paint on the horizontal support of the gate. Need someone with understanding of these gates to assess and adjust it to so it doesn't scrape.

Need someone to build a covered pergola in the backyard roughly 3mx3m on concrete patio preferably attached to the house

I have a shed that almost done ,need someone to finish the roof and put the concrete pavers on the ground. Please look at photos, it is 70% done already . I have concrete pavers already .

Build a timber pergola (see photos of space and of reference pergola).

Paint/repaint Pergola Roof. In preparation for roof going on. Paint Supplied. Step ladder required. 1 coat

Supply & install beehive metal/poly combo roofing for pergola :3.6m x 1.8m 1) Pergola roof dimension of 3.6m x 1.8m 2) Supply & Install metal/polycarbonate combo corrugated roofing for pergola 3) Alternate - Metal / Poly / Metal / Poly / Metal (see sample photo) 4) Beige color metal & Poly should be a light colour to allow sunlight to pass thru (not transparent) 5) Gutter & Down piping is required (see sample photo) 6) Edge flashing is required (see sample photo) 7) Wall flashing is required (see sample photo) 8) Current pergola elevation is flat. Small elevation needed for water flow to gutter. (You can use existing wood from pergola for creating elevation as there is more than required on the roof) 9) Removal & Disposal of existing plastic sheet (photo attached) General photo of existing pergola Preferred date of installation : 8th, 9th, 10th & 11th of June

I need a True Blue garden shed installed at my property in Kingsville. The concrete slab is already done and the shed is onsite. Small shed approx 2.8m x 2.45m

The Garden shed is 1.5x 2.25m

Need someone to assemble garden shed 2x3m. All pieces are there.

Put together an EasyShed. This is the shed details https://easyshed.com.au/products/narrow-slider-garden-shed-2-25m-w-x-0-78m-d-classic

Hi, I have a Parlam Feria 3 prefab flatpacked pergola which needs assembly and installation. It's a simple 3x3 lean to structure, the roof needs to be fixed along our timber garage wall section and the two adjustable legs need to be fixed down onto our brick yard. The installation guide says it requires 2 people and to allow half a day. More info in the links below. There are power points, a ladder etc. Please only quote if you have done similar handyman jobs on airtasker. Thanks! https://www.tiptopyards.com.au/product/pergola/feria-3-pergola-verandah-patio-cover/#assembly https://w6p3t6x2.rocketcdn.me/wordpress/wp-content/uploads/2018/05/82776_Palram-Canopia_Patio-Covers_Feria_3x3_10x10_Assembly-Instructions.pdf

I need someone to help build a F80 Sole Treadmill (2023)

Hello, Need help with brick caulking the joints. It’s a 2 storey new built; scaffold is there as well. Please help with pricing

This job requires a Draftsman to draw plans and submit to council for permit. 2m High Brick Wall to be built in front yard. Approx 13 metres of wall. 1-2 bricks in thickness. There will be opening in wall for pedestrian gate and driveway gate. A few pillars as well. Please see scope of plan on photos. Green references what needs to be built. Will need to come inspect site and quote as too hard to quote on here with finer details.

Hello, Looking for a plasterer, for Square Set profile installation, for a new build house. Double Storey. Ready for plaster in 4 weeks time. Flexible though. Please advise on the quotes. Attaching Floor Plans.

Hi all, We are completing a bathroom renovation, and have had all of the walls remastered. The tiler is now laying his tiles, and has raised an issue with a partition wall being 10-15mm out of plumb. We are looking for a plasterer to build our the partition wall 10-15mm with plaster /mud, so that it is perfectly flat and level for the tiler to lay his tiles (based on a laser level). As the tiles are being laid to the ceiling it does not have to be perfectly smooth / paintable, we just need it to be level and have tight corners for the tile trim. I have attached pictures of the wall, please let me know if you need more info. Thanks

I need 1 brick pier to be built on concrete floor at the gate on the right hand side of the below picture. Brick can be arranged but you need your own tool and mortar

Assemble shed. Concrete done shed size 3x2.25 whenever

I need someone to build me a pergola... nothing fancy. At the moment, we have a shade sail that we want to replace to get more coverage. The area is approximately 3.5 x 6 metres long. Also open to ideas for the area.